Used German DMG DECKEL MAHO DMU 160P hi-dyn 5-Axis CNC
Product Description
Used DECKEL MAHO DMU 160 P hi-dyn 5-axis CNC machining center is a German-built large-capacity machine designed for high-precision, complex-part machining. Equipped with a HEIDENHAIN iTNC 530 control, 18,000 rpm spindle, HSK63 interface, 60-tool magazine and approximately 8,000 spindle running hours, it offers an attractive alternative for manufacturers looking to reduce capital investment without giving up large 5-axis machining capability.
Its generous 1600 × 1400 × 1200 mm working travels make it especially suitable for large aerospace structures, molds, precision housings and other complex components requiring multi-side machining in fewer setups.
Technical Specifications
| Parameter | Specification |
|---|---|
| Condition | Used |
| Machine Type | 5-Axis CNC Universal Machining Center |
| Brand | DECKEL MAHO / DMG |
| Model | DMU 160 P hi-dyn |
| Country of Origin | Germany |
| CNC Control | HEIDENHAIN iTNC 530 |
| X-Axis Travel | 1600 mm |
| Y-Axis Travel | 1400 mm |
| Z-Axis Travel | 1200 mm |
| B-Axis Range | +180° / -30° |
| C-Axis | 360° |
| Maximum Spindle Speed | 18,000 rpm |
| Spindle Motor Power | 28 kW |
| Tool Holder | HSK63 |
| Tool Magazine Capacity | 60 tools |
| Spindle Running Time | Approx. 8,000 hours |
| Feed Drive | Water-cooled feed drive system |
| Through-Spindle Coolant | Equipped |
| Coolant Filtration System | Equipped |
| Chip Conveyor | Equipped |
| Machining Capability | Simultaneous 5-axis machining |
| Accuracy Verification | Geometric and positioning inspection records available |
| Machine Status | Used machine available for inspection and testing |
Applications & Suitable Industries
The DECKEL MAHO DMU 160 P hi-dyn used 5-axis machining center is particularly valuable when large, complex components require machining from multiple angles while minimizing repeated clamping.
Typical applications include:
- Aerospace manufacturing: aircraft engine housings, structural components, aerospace frames, precision aluminum and alloy parts.
- Die and mold manufacturing: large injection molds, automotive molds, tire molds, compression molds and complex mold inserts.
- Automotive manufacturing: structural components, prototype tooling, large fixtures and precision housings.
- Energy and power equipment: turbine-related components, pump housings, valve bodies and complex equipment parts.
- Heavy machinery: gearbox housings, compressor housings, machine-tool components and large structural parts.
- General precision engineering: complex parts requiring 3+2 or simultaneous 5-axis machining with fewer setups.
For manufacturers currently comparing a new large 5-axis machining center with a high-quality used machine, this DMU 160 P hi-dyn can significantly reduce initial equipment investment while providing a large machining envelope and established European machine-tool engineering.
FAQ
Is this DECKEL MAHO DMU 160 P hi-dyn a used machine?
Yes. This is a used German DECKEL MAHO 5-axis CNC machining center, not a new machine. It was sourced from an overseas factory closure and is being offered on the second-hand machinery market.
Can I verify the machine accuracy before purchasing?
Yes. Geometric, axis deviation, positioning and circularity inspection records are available for evaluation. Buyers can review the available inspection data and compare the results with the tolerances required for their own components before making a purchasing decision.
Can the DMU 160 P hi-dyn perform simultaneous 5-axis machining?
Yes. The machine is configured as a 5-axis CNC machining center with rotary-axis capability and a HEIDENHAIN iTNC 530 control, making it suitable for complex multi-surface machining and reducing the need for repeated workpiece setups.
What tooling system and tool magazine does this machine use?
The spindle uses an HSK63 tool interface and the machine is equipped with a 60-position automatic tool magazine. The 18,000 rpm spindle also makes the machine suitable for both precision finishing and efficient machining of complex components.
Why should I consider this used DMU 160 P instead of buying a new 5-axis machining center?
For companies trying to control capital expenditure, a well-maintained used large-format 5-axis CNC can offer significantly lower acquisition cost and shorter deployment time. This machine combines large travels, an 18,000 rpm spindle, HEIDENHAIN control and approximately 8,000 spindle hours, making it worth considering for businesses that need substantial 5-axis capacity without the investment required for a comparable new machine.
$210000.00
Brand
DMG
Model
DMU 160 P hi-dyn
Origin
DE
Processing Time
8000h
Machine Status
- In stock
- Company-owned inventory
- Delivery time: 9 days
Available inspection support
- Machine appearance check
- Control system power-on check
- Spindle and axis movement check
- Grinding area photo check
- Electrical cabinet photo check
- Machine nameplate verification
- Remote video inspection
- Optional third-party inspection
Supplier's customization ability
- Minor customization
- Drawing-based customization
- Sample-based customization
- Full customization