Used WASINO MEISTER CNC Surface Grinder | Japan

Loading carousel...

Product Highlight

Used WASINO MEISTER is a Japanese CNC surface and form grinding machine equipped with a FANUC Series 20-F control system. Featuring 600 × 250 mm table travel, a 150 kg maximum table load, and a grinding spindle speed range of 500–5,000 rpm, it is suitable for precision tooling, mold and die components, and general surface grinding applications. This pre-owned grinder offers a cost-conscious equipment option for industrial workshops, subject to confirmation of its operating condition and specifications.

Product Description

Used WASINO MEISTER features a FANUC Series 20-F CNC controller, 600 × 250 mm table travel, and a grinding spindle speed range of 500–5,000 rpm. Suitable for surface and form grinding applications in mold making, precision tooling, and metalworking, it offers a practical alternative to investing in new machinery. Contact us for machine availability, condition details, and a competitive quotation.

Technical Specifications

Parameter	Specification
Machine Type	CNC Surface & Form Grinding Machine
Brand	WASINO
Series / Model	MEISTER
Country of Origin	Japan
Machine Condition	Used / Pre-owned
CNC Controller	FANUC Series 20-F
Listed Maximum Size (L × W × H)	400 × 200 × 100 mm*
Table Travel (Longitudinal × Cross)	600 × 250 mm
Table-to-Spindle Center Distance	90–400 mm
Maximum Table Load	150 kg
Grinding Wheel Diameter	205 mm
Grinding Wheel Width	6.4–25 mm
Grinding Wheel Bore Diameter	31.75 mm
Grinding Spindle Speed	500–5,000 rpm
Rapid Feed Rate	3,000 mm/min*
Machine Dimensions (L × W × H)	2,700 × 2,400 × 1,900 mm
Approximate Machine Weight	2,400 kg

*The original specification identifies 400 × 200 × 100 mm as a maximum size associated with the chuck. Its exact interpretation and the rapid-feed axis require confirmation. All specifications are based on the supplied equipment information and should be verified before purchase.

Applications & Suitable Industries

Precision Surface Grinding

Suitable for grinding flat surfaces of metal workpieces where controlled material removal and surface finishing are required.

Mold and Die Manufacturing

Applicable to the finishing of mold inserts, die components, tooling plates, and other precision parts commonly used in mold-making workshops.

Tool and Fixture Manufacturing

Can be used for grinding suitable machine fixtures, jigs, tool components, and other workpieces requiring accurate surface finishing.

Precision Metal Components

Suitable for selected precision metalworking operations, including the finishing of mechanical components and industrial tooling parts.

Machinery Replacement and Workshop Expansion

A practical second-hand grinding machine option for manufacturers looking to expand workshop capabilities or replace existing grinding equipment without the higher initial investment associated with new machinery.

Actual grinding capability, achievable tolerances, and suitability for specific materials depend on the machine's condition, configuration, and tooling.

FAQ

What CNC control system does the WASINO MEISTER use?

This machine is equipped with a FANUC Series 20-F CNC controller. Its current operating status and available functions should be verified during machine inspection.

What are the table travel and load capacity of this grinder?

The listed table travel is 600 mm longitudinally and 250 mm crosswise, with a maximum table load of 150 kg. The actual allowable workpiece size depends on the chuck arrangement, machine clearance, and grinding setup.

Can this used WASINO MEISTER grinder be used for mold and die manufacturing?

Yes. The WASINO MEISTER series is intended for precision grinding applications and can be suitable for mold components, die parts, and precision tooling. Actual performance and achievable accuracy should be confirmed before purchase.